Features
● Analog input channels: 8.
● Analog output channels: 8.
● Processor: ADI SHARC 21489@450 MHz SIMD.
● DSP processing power: 400 MIPS, 1.6 GFLOPS.
● Sampling rate: 48 kHz, ± 100 ppm.
● THD+N: 0.002% @+4dBu.
● Input dynamic range: 110dB.
● Output dynamic range: 110dB.
● 1-channel RS232.
● Built-in USB sound card, supports music playback, recording and soft video conferencing (such as: ZOOM, Tencent Conference, DingTalk Conference, etc.).
● Bus-type AEC, tail time: 512ms, convergence rate: 60dB/S, Echo cancellation amplitude: 60dB.
● AFC (feedback suppression) of independent channels, using notch algorithm, transmission gain improvement amplitude: 10dB.
● Noise suppression (ANS), signal-to-noise ratio improvement of 18dB.
● 8-band British parametric equalization, providing 5 filter options: Parametric, Lowshelf, Highshelf, Lowpass, Highpass.
● Provide terminal users with customized operation interface, supporting up to 30 devices to be managed with the same interface.
● With central control function, it can control the power supply, signal switching, environmental control, audio and other overall functions in the system, and realize the functions required for one-click system activation.
Hot Tags: dsp audio processor, China dsp audio processor manufacturers, factory
Specification
|
Processor |
ADI SHARC 21489 |
|
Sampling rate/quantization bit |
48K/24bit |
|
DSP floating point engine |
40bit |
|
Number of analog input and output channels |
8 x 8 |
|
Input gain |
0/6/12/18/24/30/36/42/48dB |
|
Phantom power |
+48V/10mA max |
|
Frequency response (20~20kHz) |
±0.5dB |
|
Maximum level |
+18dBu |
|
THD+N |
0.002% @+4dBu |
|
Input dynamic range |
110dB |
|
Output dynamic range |
110dB |
|
Channel isolation @1kHz |
108dB |
|
Input impedance (balanced connection) |
5.4KΩ |
|
Output impedance (balanced connection) |
600Ω |
|
System delay |
<3ms |
|
Working power supply |
AC 220V, 50Hz |
|
Dimensions (WxDxH) |
482 x 200 x 45mm |
|
Transport weight |
3KG |
Q: What are the differences between the core functions of the DSP Audio Processor and the standard version? Does it meet basic needs?
A: The economic version reduces costs by simplifying some advanced features while retaining the core functions. The specific differences are as follows:
Simplified functions: retain basic routing and mixing capabilities (8×8 matrix), but may remove professional modules such as AEC (acoustic echo cancellation) and Dante network support;
Processing performance: using lower-order DSP chips (such as ADI 21479), the dynamic range is about 105dB (the standard version can reach 120dB), but it is enough to cope with small and medium-sized conference rooms and classrooms;
Simplified interfaces: usually only analog input/output (XLR/TRS) is provided, and digital interfaces (such as AES3, Dante) are cancelled, but basic RS-232/485 control is supported.
Applicability: It is completely sufficient for scenarios with limited budgets and no need for complex acoustic processing (such as background music distribution and simple sound reinforcement).







