Features
● 2 5.25-inch full-range units.
● High-density fiberboard cabinet, with raindrop paint treatment on the surface.
● A network speaker that realizes distributed power supply, audio signal transmission, and intelligent control through a network cable.
● Automatically assign IP addresses through router DHCP, and can be used in any location of the LAN.
● Each receiving channel speaker can be controlled independently to achieve point-to-point audio amplification.
● It has the characteristics of simple wiring, flexible use, and convenient management.
● Supports multiple installation methods such as vertical installation/horizontal installation.
Hot Tags: poe dante speaker, China poe dante speaker manufacturers, factory
Specification
|
Rated impedance |
8 ohm |
|
Power |
60W |
|
Frequency response range |
90HZ-15KHZ |
|
Sensitivity |
93dB/M/W |
|
Maximum sound pressure |
112dB |
|
Directivity |
120°×120° |
|
Interface |
RJ45 10/100Mbps adaptive Ethernet port |
|
Protection function |
overcurrent protection; high temperature protection; overload protection. |
|
Net weight |
3.8kg |
|
Dimensions (W*D*H) |
200×170×320mm |
Q: In the POE Dante Speaker, how do the dual woofer design and Dante network transmission technology work together to optimize sound quality performance and system stability?
A: The dual 5.25-inch woofers can achieve accurate restoration of full-band signals by enhancing the low-frequency response range and dynamic performance, combined with the high-fidelity characteristics of Dante digital audio transmission technology (no compression, no loss). POE power supply transmits power and digital audio signals synchronously through a single network cable, avoiding the line interference problem of traditional analog transmission. At the same time, it supports up to 64 channels of audio data carrying capacity, ensuring signal synchronization and low latency (usually less than microseconds) when multiple devices are networked. In addition, Dante Controller software can realize remote routing configuration and device management, further simplifying the debugging process and improving system stability.







