Features
● High-definition 2.4-inch full-color display screen shows microphone status, current time and date, speaking time, supports speaking timer, timed speaking, signal strength, battery power, ID number and other information clearly displayed.
● The microphone uses a 48kHz sampling rate, and the microphone only takes 5 seconds to power on and connect.
● It has an intelligent fault detection function to prompt users of AP failure, host communication failure, low signal strength, etc.
● It has a simple TYPE-C setting SSID and password function to ensure that the wrong AP will not be connected when expanding the system.
● It has speech timing and timed speech functions.
● Adjust the voice control sensitivity and set the shutdown time through PC software.
● It has a 5-band EQ adjustment function, which can adjust the different sound effects of all microphones as a whole until the perfect effect is achieved.
● Supports the sign-in function, which can be set and initiated through PC software.
● Adopting 128-bit AES encryption technology, supporting WPA/WPA2 wireless security technology, preventing eavesdropping and unauthorized access, and providing higher confidentiality of the conference system.
● Adopting wireless transmission technology, built-in rechargeable lithium battery, does not affect normal conference use.
● The chairman has a priority function and can turn off the microphones of all representatives who are speaking.
● Built-in lithium battery, battery capacity is about 10 hours.
● With 1 3.5mm stereo headphone jack.
● Support TYPE-C port for upgrading program and support 18W fast charging, and can charge the microphone through a power bank.
Application
Connection
Hot Tags: conference room mic system, China conference room mic system manufacturers, factory, Wired Conference Microphone System, Class D Audio Amplifier, Class D Amplifier 4 Channel, Conference Table Microphone, 4 Inch Ceiling Speaker, PA Over IP
Specification
|
Microphone type |
cardioid electret |
|
Frequency response |
80Hz~16KHz |
|
Microphone input impedance |
1KΩ |
|
Sensitivity |
-40±1.5dB (0dB=1V/Pa,at 1KHz) |
|
Maximum SPL |
100dB (THD>3%) |
|
Signal-to-noise ratio |
>80dB(A) |
|
Crosstalk |
>70dB |
|
Dynamic range |
>80dB |
|
THD |
<0.1% |
|
Maximum power consumption |
1.5 W |
|
Power supply |
lithium battery |
|
Charging method |
charge via TYPE-C interface, connected to charging box |
|
Color |
black |
|
Sign-in function |
button sign-in |
|
Display |
2.4 inches |
|
Dimensions (LxWxH) |
|
|
Installation method |
desktop |
|
Wireless frequency range |
5.15GHz~5.85GHz |
|
Battery capacity |
mAh |
|
Weight |
Kg |
|
Working time in speech mode |
10 hours |
|
Microphone rod length |
long microphone rod 400mm black |
Q: How stable is the WiFi transmission technology used by Conference Room Mic System in actual applications?
A: Regarding the stability of the WiFi transmission technology used by the 5G WiFi Wireless Chairman Unit in actual applications, current information shows that 5G communication technology has strong advantages and characteristics, and its stability is adapted to the actual situation, and the corresponding network layout work is set up and formed in different communication channels. At the same time, the 5G WiFi conference system unit adopts WiFi transmission technology, and the wireless indicator standard is IEEE Draft2.0 802.11n, with strict digital protection, which can ensure its stability and avoid interference to a certain extent.
Q: How does the Conference Room Mic System avoid interference with other wireless devices?
A: Coordinate the frequency coordination of the equipment and promptly investigate and deal with interference faults.
Use equipment with ultra-high anti-interference capabilities, such as the equipment in the 5G WIFI wireless conference system solution provided by YZ Audio, to transmit fully digital audio output signals in the form of hidden wireless signals to enhance anti-interference performance.
