Touch Screen Network Mixer Amplifier

Touch Screen Network Mixer Amplifier
Details:
4.3" Touch-screen Network Mixer Amplifier YZ-7120S2
4 Ohm,70V, 100V speaker loads
Supports protocols: RTP, UDP, TCP/IP, FTP
Supports 80W 120W 240W 350W 500W 800W 1000W
Send Inquiry
Download
Description
Specification
FAQ

YZ-7120S2A

YZ-7120S2B

 

Features

 

 

  • CPU uses ARM Cortex A7@900MHz;
  • Audio codec: Supports software codecs, including G.711, G.726, and ADPCM, and supports Audio 3A (AEC/ANR/AGC);
  • Standard configuration includes one 10/100M RJ45 network communication interface, supporting LAN and WAN deployment;
  • Built-in one-channel network hardware audio decoding module for real-time/timed music playback;
  • Sampling rate can be adjusted in the background, allowing users to freely select the highest sampling rate within the LAN for optimal sound quality (supports WAV 8K/16K/44.1K, AAC 16K/44.1K/48K selectable);
  • Background hardware resource monitoring displays CPU and memory usage ratios and continuous running time;
  • This device supports single-unit and batch remote upgrades via LAN and WAN, facilitating efficient and rapid customer service;
  • The volume potentiometer uses a fully sealed dustproof design, permanently dustproof, and noise-free adjustment;
  • Employs a wide-voltage PFC circuit, compatible with AC 100V-240V power supplies without being affected by voltage fluctuations;
  • Uses a high-efficiency Class D digital amplifier with comprehensive overload, overvoltage, high-temperature, and DC protection circuits;
  • Two local microphone inputs with independent volume control;
  • One local line input with independent volume control;
  • One EMC emergency audio input for priority insertion, equivalent to network signal input;
  • One auxiliary audio output interface for expanding external power amplifier;
  • One local network volume control function;
  • 4.3-inch color touchscreen display with industrial-grade touch operation for human-machine interaction and sensitive touch response;
  • Includes one local USB flash drive playback function;
  • Features one-way on-demand function, allowing users to access the server software's music library and freely play programs on demand;
  •  Features multiple operation modes (selectable loop playback mode, play/pause, track selection, previous track, next track, volume adjustment, etc.);
  • Includes a password-controlled login interface with options for password and passwordless login, and a factory reset function;
  • Features four LED status indicators (power indicator, audio signal indicator, peak reduction indicator, protection indicator) for clear visibility of operating status;
  • Built-in three-wire volume control forced-cut output interface, with no limit on the number of volume controls provided the amplifier power is not exceeded;
  • Built-in DC24V power output for forced-cut 4-wire volume controllers;
  • One short-circuit signal input, which can trigger a local alarm via software settings;
  • One short-circuit signal trigger output for driving other linked devices;
  • This device has a three-level priority function: EMC and network are the highest priority, MIC1 is the second highest priority, and MIC2 and AUX are the third highest priority;
  • Built-in primary/backup switching detection module, supporting switching to backup power input within 0.3 seconds in case of network or power outages or unit failures;
  • Equipped with one 100V constant voltage power backup input interface

 

Application

 

 

IP Application2

 

Connection

 

 

IP Diagram

 

Specification

 

 

Total Harmonic Distortion

≤0.5%

Wideband Signal-to-Noise Ratio

≥81dB

Weighted Signal-to-Noise Ratio

≥86dB

Network Interface

RJ45

Network Transmission Rate

100Mbps

Supported Protocols

RTP, UDP, TCP/IP, FTP

Audio Format

MP3/WAV

Audio Mode

16-bit Stereo CD Quality

Sampling Rate

8K~48K

Bit Rate

8K~512Kbps

LINE OUT Output Level

775mV, 2-pin RCA connector

LINE OUT Output Impedance

470Ω

AUX input sensitivity

300mV (unbalanced)

MIC input sensitivity

10mV (unbalanced)

Standby power consumption

<10W

Frequency response

90Hz~15KHz

Output method

4~16Ω constant impedance output, 70V/100V constant voltage output

Protection circuit

DC output, overload, over-temperature, short circuit protection circuit

Ambient temperature

-20℃~60℃

Ambient humidity

20%~80% relative humidity

Input power supply

~220V/50Hz

Dimensions

485 (W) × 385 (D) × 90 (H) mm

Send Inquiry