

Features
● High-inverter energy-saving switching power supply, ultra-high-performance Class D low-power digital power amplifier.
● Black high-grade 1U aluminum alloy panel ultra-thin chassis structure design, small cabinet space occupation, good heat dissipation.
● The panel has independent LED lights for signal, protection, peak clipping, output signal, green-orange indication and power input blue indication.
● Complete protection functions such as short circuit, overload, high temperature, peak clipping and DC.
● Built-in low-cut compressor effectively filters out useless music signals in the frequency range of 20HZ-20KHZ; more stable and reliable, with clearer sound quality.
● With single balanced/unbalanced audio signal input, dual-channel rated power 2*500W.
● With independent input gain control signal amplitude adjustment and compensation (-3dB -0db range adjustable VOL LEVEL).
● Constant voltage/constant resistance dual switchable impedance balanced output (100V, 8Ω).
● The channel with high-impedance filter can be switched by the DIP switch, so that the sound reinforcement output has no upper and lower limits, and the broadcast intermediate frequency is clearer and brighter.
● With automatic temperature control cooling fan, front suction and rear exhaust, forced air cooling. The cooling fan sucks air from the front and exhausts it from the back. Do not block the air intake and exhaust ports.
● XLR balanced input with Phoenix output terminal (+ -= 100V: S+=8Ω).
● Built-in automatic standby function saves power consumption. When there is no audio signal input, the power amplifier circuit stops working and the power supply circuit continues to work, thereby saving energy, reducing temperature rise and increasing product life. When there is a signal input, it automatically exits the energy-saving mode.
● Optional DC24V power input port, 110V and 230V AC input switchable With voltage adaptation range (20~27.5V) protection to avoid long-term battery power failure.
● The equipment is electrically isolated, and the signal input and amplifier output are electrically isolated, meeting the requirements of 3C, UL, and IEC60065 certification.
Hot Tags: class d amplifier 2 channel, China class d amplifier 2 channel manufacturers, factory, modern pa amplifier, mid frequency pa amplifier, high gain bandwidth pa amplifier, limiter for pa system, commercial grade pa amplifier, conference pa amplifier
Specification
|
Model |
YZ-D2120 |
YZ-D2240 |
YZ-D2350 |
YZ-D2500 |
|
Description |
Class-D Two Channel Power Amplifier |
|||
|
Rated Power Output |
2x120W |
2x240W |
2x350W |
2x500W |
|
Speaker Output |
100V & 8 Ohm |
|||
|
Frequency Response |
L/H Cut OFF 20Hz-20KHz (+1/-2dB) L/H Cut ON 70-10khZ ((+1/-3dB) |
|||
|
Input |
0.775V, 0dBu, balanced phoenix connector by two channels |
|||
|
Input Impedance |
10KΩ |
|||
|
THD |
<0.1% (1KHz/-3dBv, 100W) |
|||
|
S/N Ratio |
>80dB |
|||
|
Power Consumption |
280W |
520W |
750W |
1050W |
|
Power Supply |
230V AC & 24V DC, 50-60Hz |
|||
|
Dimension |
484x420x44 mm |
|||
|
Weight |
7.0kg |
7.3kg |
7.8kg |
8.2kg |
Q: What are the main features of Class D Amplifier 2 Channel that make it different from other amplifier?
A: It utilizes digital circuit amplification. Its input consists of the original audio signal and a reference wave, such as a 500kHz triangular wave that oscillates linearly between -2V and +2V.
It can achieve the highest efficiency while maintaining a relatively low distortion.
Compared to other linear output stages like A, AB, and B classes, even in the most efficient cases, the D class design offers certain advantages. The specific differences lie in the selection of the static operating point. A class amplifiers have the largest static operating current, meaning they consume current even without an input signal, resulting in the lowest efficiency.
Q: How does the efficiency of Class D Amplifier 2 Channel compare to other types of amplifiers in similar power ranges?
A: In similar power ranges, Class D Amplifier 2 Channel typically offers higher efficiency compared to other types of amplifiers. Class D amplifiers use pulse-width modulation to switch the power transistors on and off rapidly, resulting in less power dissipation and higher overall efficiency. This efficiency advantage is particularly noticeable in applications where power consumption is a concern.







