Alarm Panel

Alarm Panel
Details:
At YZ AUDIO, we present the Alarm Panel as an alert source for public address installations that need a defined way to introduce an alarm message into an audio system. It is intended for system integrators, PA distributors and project contractors planning building announcements, operational alerts and recorded instructions. The model identified on our product page is YZ-815A. Its role should be assessed alongside the controller, amplifiers and loudspeaker circuits in the proposed installation.
Send Inquiry
Download
Description
Specification
FAQ

Product Overview

 

 

At YZ AUDIO, we present the Alarm Panel as an alert source for public address installations that need a defined way to introduce an alarm message into an audio system. It is intended for system integrators, PA distributors and project contractors planning building announcements, operational alerts and recorded instructions. The model identified on our product page is YZ-815A. Its role should be assessed alongside the controller, amplifiers and loudspeaker circuits in the proposed installation.

For a buyer specifying an emergency alert panel, the important questions are how activation reaches the unit, where its audio output connects and which areas receive the message. The supplied specification identifies microphone and line recording inputs, a line output and one alarm activation input. These interfaces provide a starting point for checking compatibility; they do not establish an independently addressable zone count or a complete emergency priority sequence.

Share your system diagram, required message length and operating sequence with us. Confirming these details before ordering helps distinguish the alert-source requirement from the separate tasks of zone selection, amplification and site commissioning.

 

YZ-815AD

YZ-815AB

Request a Quote for Alarm Panel today

 

Key Features

 

 

Microphone recording input. The published input figure is below 5 mV with a 600 Ω impedance entry. This gives integrators a reference for microphone matching, although connector type, input count and any microphone power provision still require confirmation before selecting accessories.

Line recording input. The listed figure is below 400 mV with a 10 kΩ impedance entry. A compatible source can be assessed against this input, with its output level adjusted during commissioning to avoid excessive recording level and distortion.

Audio output for system integration. The line output is specified above 200 mV. Compare this figure with the receiving controller or amplifier input sensitivity; it is an audio interface specification and should not be treated as a loudspeaker power rating.

Defined external activation point. One alarm activation input is listed. Establish its electrical requirements, operating sequence and reset behavior before connecting an external contact or control interface; one input does not establish one independently controlled broadcast zone.

Speech focused bandwidth. The stated frequency response is 100 Hz to 3.4 kHz within ±3 dB. This is relevant to voice-message reproduction, but intelligibility also depends on the recording, loudspeaker layout, acoustic conditions and background noise.

Recording capacity subject to reconciliation. The supplied table lists 60 minutes, while the live page description states 60 seconds. We flag this discrepancy explicitly so that an approved message script and a confirmed recording specification can be matched before purchase.

 

Contact us to discuss your Alarm Panel project

 

Customization & OEM/ODM Services

 

 

Send us an Alarm Panel customization brief covering your brand artwork, panel language, enclosure color, connection requirements and packaging. Treat these as items for feasibility review until we issue an approved specification. Requests for different input modules, zone functions, communication protocols or software behavior require an engineering assessment; they are not confirmed options for the standard unit.

 

Our proposed review sequence is to agree the application and signal flow, assess requested changes, confirm commercial terms, approve a sample and freeze the production specification. If your request concerns "power," identify whether you mean the supply input or amplifier output: this page does not establish an integrated power amplifier. A change to the supply arrangement must be reviewed against the intended market requirements.

Commercial fields for approval: standard-order MOQ [TO CONFIRM]; customized-order MOQ [TO CONFIRM]; sample preparation time [TO CONFIRM]; customization lead time [TO CONFIRM]. Any tooling charge, artwork approval, sample cost and freight arrangement should be stated in the quotation. Contact us with your quantity and required delivery date to request a scoped OEM/ODM proposal.

 

Why Choose YZ AUDIO

 

 

We frame the Alarm Panel discussion around the integration decisions that affect your project: input matching, recording requirements, output compatibility and the required activation sequence. Providing a system drawing with your inquiry makes the scope easier to review and helps keep the quoted configuration aligned with the installation. A clear bill of materials should identify which device performs each control function.

 

For procurement transparency, our review draft leaves commercial commitments visible until approved: dispatch time for available standard units [TO CONFIRM] business days; customized production time [TO CONFIRM] business days; inquiry response target [24 hours - PROPOSED, NOT VERIFIED]; warranty duration [TO CONFIRM] years. The confirmed quotation should distinguish production completion, dispatch and transit time so that these are not mistaken for the same delivery milestone.

 

Ask us for the evidence package applicable to your selected model and destination. CE documentation, RoHS evidence and any ISO management-system certificate must be checked for scope, validity and the responsible entity. They are not interchangeable, and this draft does not claim that any of them has been verified for this Alarm Panel.

 

Factory area [TO CONFIRM] m², production-line count [TO CONFIRM] and annual capacity [TO CONFIRM] units require approved company records. Product service life also remains unconfirmed; it should not be inferred from the warranty period. For a documented supplier assessment, request current facility information, relevant test records and the agreed after-sales procedure together with your quote.

 

Application Scenarios

 

 

  • Campus announcements. Assess the panel as an alert-message source feeding the campus PA controller. Confirm how teaching areas, corridors and shared spaces are selected and how an alert interrupts routine audio.
  • Factory alerts. Use the project review to match recorded instructions to operational needs. Background noise, hearing protection and loudspeaker coverage require a separate audibility and intelligibility assessment.
  • Shopping centers. Plan the interface with the existing music and paging system. Define affected areas and restoration of normal operation before specifying a complete alert sequence.
  • Hospitals and emergency broadcast projects. Assess compatibility within the approved system design. This page does not establish nurse-call functionality, life-safety certification or suitability as a standalone evacuation controller; request the relevant evidence before selection.

 

FAQ

 

 

Q: What is the MOQ for the Alarm Panel?

A: Standard and customized minimum quantities are [TO CONFIRM]. Specify your initial order and expected repeat demand so the applicable order terms can be assessed. Contact us for a quantity-based quotation.

Q: What is the delivery lead time?

A: Standard dispatch and customized production schedules are [TO CONFIRM]. Transit time depends on destination and shipping method; a requested arrival date is not a confirmed commitment. Send your project deadline for a delivery proposal.

Q: How does customization work?

A: Submit artwork, interface requirements and the intended operating sequence. Feasibility review, quotation and sample approval should precede specification release. Contact us to review your Alarm Panel customization brief.

Q: What warranty policy applies?

A: Warranty duration, start date, exclusions, repair arrangements and freight responsibilities are [TO CONFIRM]. Obtain the written policy for the quoted model before ordering. Request the applicable warranty terms with your inquiry.

Q: Can I order a sample?

A: Sample availability, price, preparation time and freight terms are [TO CONFIRM]. Check activation, playback and compatibility against an agreed acceptance plan. Contact us to request a sample proposal.

Q: Does it replace a zone paging panel?

A: The evidence does not establish independent zone routing or a programmable priority matrix. Identify the controller responsible for these functions in your system. Send us your zone schedule for compatibility review.

Q: Is the recording time 60 seconds or 60 minutes?

A: The page contains both figures in different sections. Neither is treated here as an approved purchase commitment until the factory resolves the conflict. Contact us for the current recording specification.

 

Technical Specifications

 

 

The following values reproduce the supplied evidence with normalized unit formatting. Unclear entries are retained rather than silently corrected. Confirm the current model revision before issuing a purchase specification.

 

Parameter

Published value or verification status

MIC input

<5 mV; 600 Ω; source suffix "(2)" unclear

Line input

<400 mV; 10 kΩ; source suffix "(2)" unclear

Line output

>200 mV

Frequency response

100 Hz–3.4 kHz (±3 dB)

THD

<0.01% at 1 kHz - test path unconfirmed

ADC/DAC

8 kHz sampling; "5 Bit" as published - verify

Record time

60 minutes in table; 60 seconds in description - unresolved

Alarm activation input

1

Zones and priority

Not specified; confirm system architecture

Communication protocol

Not specified; do not assume network control

 

Input sensitivity and impedance. The microphone and line figures describe different source requirements. They should not be interchanged. Their source suffixes are ambiguous, so neither entry is advertised here as two physical inputs. Confirm the wiring diagram, connector arrangement and permitted source level.

Output matching. A value above 200 mV does not define maximum output, nominal operating level or load capability. Confirm these details when connecting a paging control panel, especially if the receiving equipment expects a different line level or a balanced connection.

Bandwidth and distortion. The frequency response describes a restricted speech band. The THD figure is quoted at one frequency, without output level, load or signal-path details. It cannot by itself establish distortion through the complete recording and playback chain or prove intelligibility in a room.

Conversion and recording. An 8 kHz sample rate corresponds to a 4 kHz theoretical Nyquist limit; this is a mathematical relationship, not an additional product specification. The published "5 Bit" entry needs clarification of coding and effective resolution. Recording capacity must remain unconfirmed until the conflicting duration statements are reconciled.

Zones and emergency priority. For a zone paging panel installation, document the separate equipment responsible for zone routing, interruption of normal audio, reset and fault indication. The present evidence does not establish these behaviors in this unit. No Ethernet, RS-485 or other protocol is assumed.

System verification. IEC 60268-16:2020 describes Speech Transmission Index methods for assessing speech transmission. It does not make this panel certified or guarantee an installed system result. Use an appropriate site verification plan and the applicable project criteria. [2]

Need custom specs? Get a quote now

Send Inquiry