Features
● A single device can expand 32 input channels with high-quality preamps.
● A single device can expand 16 analog balanced XLR output channels.
● It uses network protocol for transmission, featuring ultra-low latency to meet various usage requirements.
● The transmission distance with CAT6 cable can reach up to 40 meters directly, and up to 80 meters with a dedicated signal repeater amplifier, without the need for additional power supply.
● It features dual expansion ports, eliminating the need for additional extenders or routers.
● The operation is simple and fast; once connected and powered, the mixer can automatically recognize and activate the interface box.
● The interface box can be remotely controlled to power on and start through the digital mixer.
● The entire unit is composed of high-quality components, and its robust and durable structure ensures a long service life.
Hot Tags: digital mixer with bluetooth, China digital mixer with bluetooth manufacturers, factory, USB Bluetooth Amplifier, conference microphone, Wireless Microphone for Conference Room, Ceiling Speaker with Cover, Outdoor Column Speaker, IP Paging Microphone
Specification
|
Microphone/Line Input |
Microphone/Line Input: 1-32 balanced, XLR and 1/4 TRS jacks Input sensitivity (XLR/TRS) XTR1.5mv,TRS 7mv Input analog gain -32db to 10db, 0.6~0.7 steps Maximum input level (XLR/TRS) +19dBu/+29dBu Input impedance (XLR/TRS) MIC＞5K, LINE＞10K |
|
Output |
Mix 1-16 AUX Balanced, XLR, Output impedance <75Ω Nominal output +4dbu=0db level meter reading Residual output noise =-91dbu Dynamic range 112dB Signal-to-noise ratio XLR≥ 92db,TRS≥82db Maximum output voltage 7VAC MAX Distortion <0.0003% (1Khz Full Power) Frequency response 20HZ-20KHZ+/-0.5db |
|
Size |
485*325*195mm |
|
Weight |
6.2kg |
Q: How to ensure a stable connection Digital Mixer with Bluetooth to avoid signal interruption or loss?
A: Ensure that the devices are placed in the right place: Place the digital expansion interface box and the digital audio mixer in the same place to reduce the signal transmission distance and interference.
Check the connection cables: Use good quality connection cables that meet the device requirements to ensure a firm connection and avoid poor contact.
Pay attention to the power-on and switch status of the devices: Before connecting, make sure that the devices are powered on and turned off, and then turn on the devices one by one after the connection is completed.
Optimize interface settings: According to the characteristics and requirements of the device, reasonably set the interface parameters to ensure the stability of signal transmission.
Q: How to ensure the quality and integrity of Digital Mixer with Bluetooth transmits the digital audio signal?
A: Choose the right cable: Use a coaxial cable with an impedance of 75Ω to match the impedance of the interface to ensure constant impedance and correct signal transmission.
Pay attention to the matching of interfaces and cables: Avoid mixing different types of interfaces and cables, such as not mixing RCA coaxial interface cables with RCA analog interface cables.
Ensure transmission stability: Digital audio interface technology can stably transmit high-quality audio signals to various digital audio devices. The advantages of this technology should be fully utilized to make the transmission of audio signals more reliable and efficient.
