Features
Dual 15-inch 100mm voice coil bass, direct reflection cabinet design, the width is consistent with full-range speakers. Flexible application, can be stacked or hung, wear-resistant black environmentally friendly paint four-point hanging system. The single unit is non-directional and can be hung or stacked according to the array form. Application areas include banquet halls, music restaurants and bars, multi-functional conference halls, etc.
Hot Tags: professional stage speakers, China professional stage speakers manufacturers, factory
Specification
|
Component |
LF 2×15"(100mm) |
|
Nominal Impedance |
4Ω |
|
Power Handing RMS |
800W |
|
Power Handing Peak |
3200W |
|
Frequency Response |
40Hz-300Hz |
|
Sensitivity(1w/1m): |
98dB |
|
Max.SPL |
127dB |
|
Connections |
2*NL4(pin1+(pos);pin1-(neg) |
|
Dimensions(H*W*D) |
350mmx875mmx485mm |
|
Weight |
64kg |
|
Material |
15mm birch surface multilayer board |
Q: What are the core advantages of Professional Stage Speakers in terms of frequency division design and acoustic performance?
A: The 1×15-inch two-way speaker can accurately cover the 50Hz-20kHz frequency band through the independent tweeter and woofer division of labor, solving the contradiction between high-frequency extension and low-frequency dive of the full-range unit. Its core technical advantages include:
Crossover point optimization: usually set at 1.8kHz-2.5kHz, using 24dB/Oct Linkwitz-Riley filter to reduce phase distortion and improve the separation of human voice and musical instruments;
Unit configuration: 15-inch ferrite woofer (such as 100mm voice coil + dual elastic wave design) is responsible for 50Hz-2kHz low frequency, with 1.4-inch titanium film compression tweeter to ensure high frequency fineness (sensitivity ≥96dB);
Power distribution: dual amplifier drive (such as bass 400W RMS/treble 100W RMS), with greater dynamic headroom, especially suitable for high transient scenes such as rock and electronic music.







