Best DSP Amplifier

Best DSP Amplifier
Details:
DSP+Dante Intelligent Digital Amplifier, 2x800W@8Ω Best DSP Amplifier
Send Inquiry
Download
Description
Specification
FAQ

Features

 

 

● Input: noise gate, delay (1.2s), 12-band parametric equalizer, FIR filter, compressor, matrix.

● Output: high-pass, low-pass, 10-band parametric equalizer, FIR filter, delay (500ms), RMS limiter, peak limiter.

● Advanced Class D output circuit, advanced switch mode power supply, lightweight and compact.

● Temperature-controlled continuous variable speed fan cooling, comprehensive protection circuit (thermal protection, clipping limiter, short circuit protection, etc.).

● Read the amplifier's current, voltage, impedance, temperature, fan speed information to the PC software.

● Application range: conference room, multi-function hall.

 

Hot Tags: best dsp amplifier, China best dsp amplifier manufacturers, factory, ip audio streaming, audio over ip for customer service training, networked ip audio for sales training, network audio for home theater systems, networked ip audio, ip audio for stress management training

Specification

 

 

Rated power

2*800W (8Ω), 2*1200W (4Ω), 1*2400W bridge (8Ω)

Processor

CEVA DSPx2 @350 MHz SIMD/ARM Cortex V7@840MHz

Analog channel sampling rate

48/96kHz

Quantization bit

24bit

Dante sampling rate

48/96kHz, 2x2 Dante channel

Level

(maximum input) +20dBu (maximum output) +10dBu

Input sensitivity

0.775Vrms

Frequency response

20Hz-20KHz (±0.5dB) @1W, 8Ω

Signal-to-noise ratio

≥100dB (A-weighted, 20Hz-20kHz, 8Ω)

THD+N

< 0.05% (10% rated output power, ,8Ω)

Input impedance

20kΩ (balanced), 10kΩ (unbalanced)

Conversion rate

50 V/μs@8Ω, input fiter bypassed

Damping factor

> 1000 (20Hz-200H, 8Ω)

Operating voltage

~100-240V (±10%) 50/60Hz

Product size (H*W*D)

483x45x299mm (W*H*D)

Net weight

5.2kg

Q: How to debug a Best DSP Amplifier to achieve the best effect?

A: Set the crossover point: Set high-pass and low-pass filters according to the specifications of the speaker to ensure that each speaker only receives frequencies within its operating range. For example, set a high-pass filter for the tweeter and a low-pass filter for the woofer.

Adjust the delay: Measure the distance from each speaker to the listening position and set the corresponding delay in the DSP so that the sound reaches the listener's ears synchronously and improves the sense of sound field positioning.

Equalization (EQ): Use the parametric equalizer (PEQ) in the DSP to eliminate standing waves or resonant frequencies and optimize the overall frequency response curve.

Gain matching: Adjust the input gain and output level to ensure that the volume of all channels is balanced while avoiding distortion.

Audition and fine-tuning: Play different types of music for audition, and further optimize the parameters according to the actual effect until a satisfactory sound quality performance is achieved.

Send Inquiry