Features
● Input: noise gate, delay (1.2s), 12-band parametric equalizer, FIR filter, compressor, matrix.
● Output: high-pass, low-pass, 10-band parametric equalizer, FIR filter, delay (500ms), RMS limiter, peak limiter.
● Advanced Class D output circuit, advanced switch mode power supply, lightweight and compact.
● Temperature-controlled continuous variable speed fan cooling, comprehensive protection circuit (thermal protection, clipping limiter, short circuit protection, etc.).
● Read the amplifier's current, voltage, impedance, temperature, fan speed information to the PC software.
● Application range: conference room, multi-function hall.
Hot Tags: dsp 4 channel amp, China dsp 4 channel amp manufacturers, factory, ip audio for home audio distribution, ip audio for golf courses, ip audio for wireless home audio, ip audio for music streaming services, audio routing in ip networks, audio transmission with ip
Specification
|
Rated power |
4*300W (8Ω), 4*450W (4Ω), 2*900W bridge (8Ω) |
|
Processor |
CEVA DSPx2 @350 MHz SIMD/ARM Cortex V7@840MHz |
|
Analog channel sampling rate |
48/96kHz |
|
Quantization bit |
24bit |
|
Dante sampling rate |
48/96kHz, 4x4 Dante channel |
|
Level |
(maximum input) +20dBu (maximum output) +10dBu |
|
Input sensitivity |
0.775Vrms |
|
Frequency response |
20Hz-20KHz (±0.5dB) @1W, 8Ω |
|
Signal-to-noise ratio |
≥100dB (A-weighted, 20Hz-20kHz, 8Ω) |
|
THD+N |
< 0.05% (10% rated output power, ,8Ω) |
|
Input impedance |
20kΩ (balanced), 10kΩ (unbalanced) |
|
Conversion rate |
50 V/μs@8Ω, input fiter bypassed |
|
Damping coefficient |
> 1000 (20Hz-200H, 8Ω) |
|
Working voltage |
~100-240V (±10%) 50/60Hz |
|
Product size (H*W*D) |
483x45x299mm (W*H*D) |
|
Net weight |
5.2kg |
Q: Can a DSP 4 Channel AMP be used in a bridged manner?
A: Yes, some models can be bridged to obtain greater power to drive specific loads.
Q: How to debug a DSP 4 Channel AMP?
A: Connect through professional software and set parameters such as volume, frequency, and delay for each channel.
Q: Does a DSP 4 Channel AMP consume a lot of power?
A: Power consumption varies depending on factors such as power and efficiency, and is generally slightly higher than that of ordinary amplifiers.







