Features
● The equipment complies with the IEC 60065 international standard.
● All-metal conference base, short gooseneck microphone.
● Cardioid directional electret microphone type, 9.7mm gold-plated microphone core.
● Supports switching of related modes following the conference host.
● Chairman unit and delegate unit can be set arbitrarily.
● Support one-key mode conversion (in chairperson mode).
● Effective sound pickup distance>40cm.
● Support camera linkage data set.
● Support hot-swap data recovery.
● Support remote volume adjustment.
● Support remote tone adjustment.
Application
Connection
Hot Tags: digital conference microphone, China digital conference microphone manufacturers, factory, wireless connectivity conference system, lounge conference system, managed conference system, corporate office conference system, hosted conference system, screen sharing conference system
Specification
|
Frequency response |
20-20,000 Hz |
|
High pass filter |
80 Hz, 12 dB/octave |
|
Sensitivity |
-40 dB (15.8 mV), re 1V at 1 Pa |
|
Impedance |
600 ohms |
|
Maximum output sound pressure level |
125 dB SPL, 1 kHz at 1% T.H.D |
|
Dynamic range |
121 dB, 1 kHz at Max SPL |
|
Signal to noise ratio |
70 dB, 1 kHz at 1 Pa |
|
Working voltage |
24V DC±5％ |
|
Working current |
80mA±5％ |
|
Connection method |
junction box, T-type head, ring hand in hand |
|
Connector |
large 6-core |
|
Tail length |
70cm |
|
Number of units opened |
1-6 optional |
|
Numbering function |
support automatic and manual numbering |
|
Installation method |
desktop |
|
Power consumption |
<2W |
|
Net weight of equipment |
0.5KG |
Q: In addition to basic sound pickup requirements, what other functions should a Digital Conference Microphone have in a conference room?
A: Other functions like voting, recording the speaker voice, simultaneous interpretation function and Phonetic transcription function
Q: How to use Digital Conference Microphone correctly?
A: Microphone placement: The microphone placement in the conference room is usually divided into two types: desktop placement and microphone stand placement. When placing the microphone on the desktop, pay attention to the angle and distance between the speaker's mouth and the microphone; when using the microphone stand, make sure that the height and angle of the microphone are suitable for the speaker.
Choose a suitable position: In order to achieve a bright and clear sound effect (just the right loudness but no howling), you need to choose a reasonable placement of the microphone.
Understand the system composition: Digital conference microphones are also called hand-in-hand conference microphones. The hand-in-hand system consists of a host, several microphone units, a six-core main cable, several repeaters and several T-type cables.
