Features
● 32 signal inputs (32 MIC inputs and 1 stereo input)
Digital input: optical/sound card, MP3
● Input channel pan adjustment
● MIC input gain adjustment (digital gain)
● +48V phantom power (MIC channels can be turned on and off independently)
● Built-in compressor, high and low pass, 5-band parametric equalization, delay, and output channel panning balance adjustment
● Fast copy function of channel parameters
● I/O EQ ON/OFF
● Multifunction Knob
● Each channel has a multi-function menu, mute and monitor
● Each channel is equipped with a travel 100MM motorized fader, signal, peak light (20 motorized faders)
● 12-channel signal output (stereo main output, 10-channel AUX output)
● AUX output (pre/post fader)
● Output processing: high and low pass filtering, 15-band parametric EQ, compressor, delay, phase
● Digital recording function
● Double row of 3-color 12-segment level indicators
● Built-in sound card (MP3, PC direct music playback)
● 4 quick scene recall modes, 20 scene memories
● Storage and recall of user parameters (can be managed on PC)
● Built-in dual DSP effects
● FX Footswitch Connector
● Optical In/Out
● Multi-operating system control software (IOS system, WINDOWS system)
● Support wired network port adjustment (or wireless adjustment with external router)
● 7 inch 800*480 resistive touch display
Hot Tags: digital pa mixer, China digital pa mixer manufacturers, factory, equalizer, audio signal tester, audio distribution amplifier, 10 Channel Mixer, audio inductance tester, vu meter
Specification
|
Microphone/Line Input |
1-32 Balanced, XLR and 1/4 TRS jacks Input sensitivity (XLR/TRS) XTR1.5mv, TRS changed to 7mv Input analog gain -32db to 10db, 0.6~0.7 steps Maximum input level (XLR/TRS) +19dBu/+29dBu Input impedance (XLR/TRS) MIC＞5K, LINE＞10K Mic input stereo link Yes Parameter link Balance, dynamics, delay, distribution, send Polarity Normal/flip |
|
Stereo line input |
ST1 Balanced, 1/4 TRS jack ST2 Interface (Digital) USB audio stream, USB flash drive, S/PDIF Input sensitivity Nominal 4dB Input analog gain -32db to 10db, 0.6~0.7 steps Maximum input level +29dB Input impedance >7KΩ Stereo link Yes Parameter link EQ, dynamics, delay, distribution, send Polarity Normal/Inverted |
|
Output |
Mix 1-10 and left and right output Balanced, XLR, L/R, 4SUB, 6AUX Output impedance <75Ω Nominal output +4dbu = 0db level meter reading Residual output noise = -91dbu Mix insert Assign FX to mix channel Dynamic range 112dB Signal-to-noise ratio XLR ≥ 92db, TRS ≥ 82db Maximum output voltage 4VAC MAX Distortion ＜0.0003% (1Khz Full Power) Frequency response 20HZ-20KHZ +/- 0.5db Sampling rate 48KHz ±100PPM ADC/DCA 24-bit Delta-sigma |
|
FX |
Internal FX 4xFX engine, send > return or insert Types Reverb, Delay, Chorus, Flanger, Symphonic Chorus, etc. 4 dedicated stereo FX returns Fader, Pan, Mute, Send to Mix/LR, 5-band EQ |
|
Control |
Fader ALPS 100mm electric Touch screen 7" TFT, 800×480 resolution Output grouping Yes Mute grouping No Network TCP/IP Ethernet for PC and iPad applications System upgrade USB upgrade Wired connection Windows PC software connection Wireless connection Windows PC/iPad/android |
|
Input management |
Input source Local CH1-CH32, ST1 local ST2 digital Equalizer 5-band parametric EQ, (20HZ--20KHZ) ±12dB, Q0.3~15 adjustable High and low pass 12db/24db, (BT/BS/LRK), 20-20K Noise gate Self-chain side chain Gate threshold -135db to -40db Attack/Release 50us-300ms/10ms-5s Compressor Self-chain side chain Threshold ratio -40db-+6db/1:1 to infinity Delay Maximum 20ms |
|
Output management |
Output channel L/R, 4SUB, 6AUX Equalizer 15-band parametric EQ, (20HZ--20KHZ) ±12dB, Q0.3~15 adjustable High and low pass 12db/24db, (BT/BS/LRK), 20-20KHZ Compressor Self-chain side chain Threshold value ratio -40db-+6db/1:1 to infinity Delay Maximum 30ms |
|
USB |
Driver CH340 (USB A) Device Use a USB hard disk (U disk) Stereo recording 2 channels (wav/mp3) 48KHz 24 Stereo playback 2 channels (WAV/MP3) 32-96KHz, 16-24 bits |
|
USB audio |
Sound card USB B Upstream 2 channels full format, 32KHz-96KHz 24-bit Downstream 2 channels, MP3, 48KHz, 24-bit |
|
Power |
100-240VAC,50-60H,150W |
|
Size |
920*620*310mm |
|
Weight |
18.2kg |
Q: What advanced audio processing features does a Digital PA Mixer offer compared to a 16 channel one?
A: Digital PA Mixer offers several advanced audio processing features compared to a 16 channel one. It typically includes input/output with no internal overload and near-zero latency. It also has fully automated motorized 100mm faders for immediate pushing, a powerful on-site management and control DAW, a 32×32 channel FireWire audio interface and USB 2.0 for DAW remote control simulation HUI and Mac
Q: How does the signal-to-noise ratio of Digital PA Mixer affect the overall audio quality?
A: A high signal-to-noise ratio means that the noise level in the audio signal is low. This allows the listeners to hear the audio content more clearly without being disturbed by the background noise. It also provides a greater dynamic range, enabling a wider range of audio levels to be accurately reproduced. In general, a larger signal-to-noise ratio indicates less noise mixed in the signal, resulting in a higher audio playback quality. Conversely, a lower signal-to-noise ratio leads to a poorer audio quality with more interference and background noise.
Q: What are the connectivity options available for Digital PA Mixer to integrate with other audio equipment?
A: Thunderbolt
Dante
Pro Tools | HD
LSlot expansion card slot with configurable I/O
2 high-quality headphone outputs
1 input / 3 outputs with the second-generation Lynx SynchroLock-2 sampling clock technology
