Product Overview
We offer the Network Intercom Panel for buildings that need a dedicated voice contact point connected to an operator station. Instead of asking visitors or staff to locate a telephone extension, the intercom panel places a call control, microphone and speaker at the point where assistance is required. Our published YZ-7P description identifies single-button calling and full-duplex communication with a network intercom microphone station.
For system integrators, electrical contractors and distribution partners, the main design question is how each location reaches the correct person. A reception area, service corridor and management office may share network infrastructure while requiring different answering arrangements. We recommend defining those destinations and verifying the receiving equipment before approving the panel configuration.
A conventional analog broadcast circuit primarily distributes audio; this network endpoint adds a local voice return path and described remote-maintenance functions within a compatible system. It does not convert an existing analog installation automatically. Use the intercom panel as part of a documented migration plan covering network access, operator availability and commissioning responsibilities, with software compatibility confirmed for the selected equipment.


Request a Quote for Network Intercom Panel today
Key Features
- A dedicated assistance control. The published design uses one call button, reducing the user interaction needed to request a conversation; the receiving destination must be configured and tested so the request reaches an attended station rather than an unassigned extension.
- Full-duplex speech for clarification. The intercom panel supports simultaneous two-way conversation, allowing an operator to ask questions while hearing the caller's response; practical intelligibility should be checked at the intended mounting position with representative background activity.
- Visibility into endpoint operation. The described monitoring functions report CPU utilization, memory utilization and running time, giving maintenance teams device-state information to review when investigating interruptions; these indicators are not a substitute for a completed voice-path test.
- Remote firmware maintenance. Individual and batch upgrade functions are listed for network deployment, which can simplify maintaining a group of installed panels; confirm the software release, permissions, update procedure and recovery arrangements before scheduling a rollout.
- Speech-processing functions. The feature list identifies echo cancellation, noise reduction and automatic gain control, addressing different parts of the conversation path; sample evaluation should include quiet callers, overlapping speech and the operator's return audio rather than playback alone.
- A defined integration output. A single analog audio output is described alongside the network interface, providing a possible connection to compatible equipment; check its 1 V signal level and 600-ohm output impedance against the receiving input before including it in the design.
Contact us to discuss your Network Intercom Panel project
Customization & OEM/ODM Services
For a branded intercom panel programme, send us the installation drawing and operating requirements alongside the artwork. Logo placement, faceplate color, packaging and identification labels can be reviewed as visual changes. Enclosure dimensions, mounting arrangements, power stages and connectors require a separate engineering assessment because they can affect fit, thermal behavior, wiring and applicable testing.
Protocol extensions, additional channels and management-software functions should be defined by the required action: who calls whom, which signal is exchanged, and how acceptance will be demonstrated. Describe the existing platform and supported interfaces so the feasibility review can distinguish configuration work from hardware or firmware development. No requested feature should be assumed available until its scope is approved.
MOQ: 100 units. Sample lead time: 7–15 working days after artwork approval. For evaluation units, contact our sales team to discuss arrangements. Request a written OEM/ODM proposal covering sample charges, development costs and the approved production schedule.
Why Choose YZ AUDIO
We bring the intercom panel enquiry into the wider building-audio discussion: the terminal, answering station, audio interfaces and maintenance arrangements must work together. Our public portfolio includes IP paging and communication equipment, providing a starting point for selecting related devices. Compatibility still needs to be demonstrated for the actual configuration rather than inferred from shared branding.
Our company profile reports approximately 80,000 m² of manufacturing space, 200 employees, 30 R&D engineers and six SMT lines. These company-wide figures support an annual capacity of 100,000 units per year. For a multi-building contract, request a model-specific capacity allocation and staged shipment plan.
The same company profile lists CE, RoHS and ISO9001 credentials. Procurement should obtain current documents and check their holder, scope and applicability to the selected intercom panel. For technical approval, we recommend recording sample results for destination selection, conversation, monitoring and restart behavior; completed test evidence must relate to the supplied revision.
Responses are provided within 24 hours. Standard dispatch is 15 business days; customized production is 30 working days. Warranty: 1 year; expected service life: 5 years. Contact us to establish the delivery and support commitments for your purchase.
Application Scenarios
- Campus service points. Place an intercom panel near an internal reception or administrative access point so staff can clarify visitor requests; coordinate its answering destination with the campus IP broadcast operation.
- Industrial-park buildings. Consider panels in maintenance corridors or staffed service areas where a fixed contact point supports assistance requests, with speech tested during representative operating noise.
- Commercial complexes. Link internal loading administration or property-service locations to responsible operators, and document who answers during different staffing periods.
- Transport facilities. Evaluate supervised indoor assistance points against the operator's accessibility and service requirements; specialist emergency-system compliance requires separate evidence.
- Smart-community management. Use an intercom panel to connect common-area enquiries with management staff, while treating resident calling and access-control interfaces as functions requiring confirmation.
FAQ
Q: What minimum quantity applies to the intercom panel?
A: The MOQ is 100 units; engineering changes may require another minimum. Send us your quantity and customization scope for a written quotation.
Q: When can standard and customized units be dispatched?
A: Standard dispatch is 15 business days; customized production is 30 working days, excluding transport. Contact us for a dated shipment proposal.
Q: How do we start an OEM/ODM project?
A: Provide artwork, mounting details, interface requirements and the receiving platform. Define sample acceptance before production release, with development work quoted separately; send us your intercom panel specification for review.
Q: What does the warranty cover?
A: Warranty: 1 year. Coverage, exclusions, freight responsibility and repair or replacement arrangements are stated in writing; request the applicable warranty document with your quotation.
Q: Can we purchase a sample for integration testing?
A: Sample lead time is 7–15 working days after artwork approval; sample charges and availability can be confirmed with our sales team. Contact us to arrange a test configuration and sample offer.
Q: Can the panel use PoE and our existing platform?
A: The published supply is DC24V; PoE is not established. SIP appears in the feature text, but platform compatibility requires testing; send us your switch, server and receiving-station details for assessment.
Q: What happens if the network or server fails?
A: Automatic failover and offline calling are not documented. Confirm the recovery behavior and any external backup equipment through a controlled system test; contact us to define the required continuity scenario.
Sources
[1] Network Intercom Panel product page: https://www.yzaudio.net/pa-system/ip-pa-system/network-intercom-panel.html
[2] Company profile: https://www.yzaudio.net/about-us ; Product range: https://www.yzaudio.net/pa-system/ip-pa-system/
[3] IETF RFC 3550, RTP media transport: https://www.rfc-editor.org/rfc/rfc3550
[4] IETF RFC 3261, SIP session signaling: https://www.rfc-editor.org/info/rfc3261/
[5] ITU-T G.114, transmission delay: https://www.itu.int/rec/T-REC-G.114
Technical Specifications
|
Parameter |
Published specification |
|
Network interface and rate |
RJ45; 100 Mbps |
|
Transport protocols |
RTP, UDP, TCP/IP, FTP; SIP additionally stated in feature text |
|
File formats and resolution |
MP3/WAV; 16-bit audio |
|
Sampling rate |
8–48 kHz |
|
Analog audio output |
1 V; 600 Ω; source notation "0 dB" |
|
Frequency response |
Signal output 30 Hz–20 kHz; power output 50 Hz–20 kHz |
|
Distortion and noise |
THD ≤0.05%; SNR ≥80 dB |
|
Power supply |
DC24V; AC220V-to-DC24V adapter listed |
|
Consumption |
3 W listed; power-budget clarification required |
|
Operating conditions |
−20°C to +60°C; 20–80% RH, non-condensing |
|
Physical size and mass |
193 × 107 × 44 mm; 0.75 kg |
|
Channels |
1 analog output described; concurrent-call capacity unconfirmed |
|
Management |
Resource monitoring and remote upgrades described; software/version to confirm |
Network and interoperability. The link rate specifies the Ethernet connection, not call capacity. RTP provides media transport; SIP handles session signaling where implemented. Neither protocol name proves cross-platform feature compatibility, so specify the receiving station and firmware in the purchase approval.
Audio representation. MP3/WAV concerns file support; 16-bit resolution and the 8–48 kHz range do not identify the negotiated speech codec. Confirm the live-call settings separately. Higher sampling rates alone cannot compensate for an unsuitable microphone position or background noise.
Output matching. The 1 V level and 600-ohm source impedance help select a compatible receiving input. The "0 dB" reference needs clarification. The two frequency-response entries concern electrical paths, not the installed speaker's acoustic coverage; THD and SNR require test conditions for comparison.
Power and environment. DC24V identifies the supply requirement, not PoE compatibility. The 3 W consumption entry needs reconciliation with the feature text's separate 30 W amplifier claim. Temperature and humidity describe operating limits, not enclosure ingress protection. Size and mass support placement planning; obtain mounting dimensions before cutting panels.
Channels and maintenance. One physical output does not establish simultaneous-call count. Confirm software licensing, endpoint capacity, alarm-interface options and permissions. Resource monitoring can assist diagnosis, but automatic rerouting, redundant servers and power-failure recovery are not documented guarantees.
Delay acceptance. No measured latency is published. A proposed project target of ≤150 ms one-way mouth-to-ear delay can guide sample evaluation, subject to an agreed test method. ITU-T G.114 addresses conversational delay; this target is not a tested intercom panel specification.
Need custom specs? Get a quote now







